姓名：周晓胜

个人资料：男，博士/博士后，教授，硕士生导师，新葡萄8883官网AMG学科后备人才

研究方向：智能制造技术；特种金属结构材料制备与加工

学科领域：机械工程

电子邮箱：zhouxs@nuc.edu.cn

个人简介：

2018年毕业于天津大学材料学专业，获工学博士学位；2018年至2020年在清华大学进行博士后研究；2021年至今就职于新葡萄8883官网AMG。兼任《新葡萄8883官网AMG学报（自热科学版）》编委，International Journal of Adhesion and Adhesives、Journal of Alloys and Compounds 等期刊审稿人。

科研、成果等情况介绍：

（1）简述

一直围绕极端服役环境下高性能金属材料的制备与加工、智能制造技术开展应用基础研究，在Acta Mater.、Mater. Sci. Eng. A、Mater. Design等材料加工领域权威期刊上发表SCI收录论文30余篇，h因子为17。主持山西省重点研发项目、国家自然科学基金、中国博士后基金等项目，参与国家杰出青年科学基金项目、国家优秀青年科学基金项目等，授权中国发明专利多项。

（2）代表性的成果

[1] X. Zhou*, Y. Zhang, Y. Li, M. Yuan, G. Li, Z. Chen, H. Zhang. Dependency of Portevin-LeChatelier Effect and Microstructure Characteristics of 9Cr ODS Steels on Strain Rates Upon Hot Deformation.Met. Mater. Int. 30 (2024) 182-193.

[2] X. Zhou, G. Li, X. Shen, Y. Liu*, Tensile strength improvement of martensitic ODS steels with Zr and Hf additions,Mater. Sci. Eng., A 829 (2022) 142071.

[3] X. Zhou*, H. Dong, Y. Wang, M. Yuan. Microstructure characteristics and mechanical performance of Fe-Cr-Ni-Al-Ti superalloy fabricated by powder metallurgy [J].Journal of Alloys and Compounds, 918 (2022): 165612.

[4] X. Zhou; C. Hao; C. Liu; Y. Liu*, Residual ferrite control of 9Cr ODS steels by tailoring reverse austenite transformation,Acta Metall. Sin-Engl., 2021, 34(2): 187-195.

[5] X. Zhou, Z. Ma*, L. Yu, Y. Huang, H. Li, Y. Liu*, Formation mechanisms of Y-Al-O complex oxides in 9Cr-ODS steels with Al addition,J. Mater. Sci. 54 (2019) 7893-7907.

[6] X. Zhou, Z. Ma*, L. Yu, Y. Huang, H. Li,Y. Liu*, Influence of Al addition upon the microstructure and mechanical property of dual-phase 9Cr-ODS steels,Met. Mater. Int. 25 (2019) 168-178.

[7] X. Zhou, Y. Liu*, C. Liu, L. Yu, H. Li, Austenitizing temperature effects on the martensitic transformation, microstructural characteristics, and mechanical performance of modified ferritic heat-resistant steel,Metall. and Mat. Trans. A49 (2018) 3525-3538.

[8] X. Zhou, C. Li*, L. Yu, H. Li, Y. Liu*, Effects of Ti addition on microstructure and mechanical property of spark-plasma-sintered transformable 9Cr-ODS steels,Fusion Eng. Des. 135 (2018) 88-94.

[9] X. Zhou, Y. Liu*, L. Yu*, Z. Ma, Q. Guo, Y. Huang, H. Li, Microstructure characteristic and mechanical property of transformable 9Cr-ODS steel fabricated by spark plasma sintering,Mater. Design 132 (2017) 158-169.

[10] X. Zhou, Y. Liu*, Z. Qiao, Q. Guo, C. Liu, L. Yu, H. Li, Effects of cooling rates on δ-ferrite/γ-austenite formation and martensitic transformation in modified ferritic heat resistant steel,Fusion Eng. Des. 125 (2017) 354-360.

[11] X. Zhou, J. Dong, Y. Liu*, C. Liu, L. Yu, Y. Huang, H. Li, Austenite to polygonal-ferrite transformation and carbide precipitation in high strength low alloy steel,Int. J. Mater. Res. 108(1) (2017) 12-19.

[12] X. Zhou, Y. Dong, C. Liu, Y. Liu*, L. Yu, J. Chen, H. Li, J. Yang, Transient liquid phase bonding of CLAM/CLAM steels with Ni-based amorphous foil as the interlayer,Mater. Design 88 (2015) 1321-1325.

[13] X. Zhou, C. Liu, L. Yu, Y. Liu*, H. Li, Phase transformation behavior and microstructural control of high-Cr martensitic/ferritic heat-resistant steels for power and nuclear plants: a review,J. Mater. Sci. Technol. 31(3) (2015) 235-242.

[14] X. Zhou, Y. Liu*, L. Yu, C. Liu, G. Sui, J. Yang, Uniaxial diffusion bonding of CLAM/CLAM steels: Microstructure and mechanical performance,J. Nucl. Mater. 461 (2015) 301-307.

[15] X. Zhou, Y. Liu*, C. Liu, B. Ning, Evolution of creep damage in a modified ferritic heat resistant steel with excellent short-term creep performance and its oxide layer characteristic,Mater. Sci. Eng., A 608 (2014) 46-52.

专利：

[1] 刘永长；周晓胜；余黎明；刘晨曦；李冲；马宗青；奥氏体相变区等温停留控制9Cr‑ODS钢中残余铁素体分布的方法，中国，ZL 201710090243.2。

[2] 刘永长；周晓胜；余黎明；李冲；马宗青；刘晨曦；一种控制9Cr‑ODS钢中残余铁素体及马氏体板条结构的方法，中国，ZL 201710090946.5。

[3] 刘永长；周晓胜；余黎明；马宗青；刘晨曦；李冲；一种细化氧化物弥散强化马氏体钢中残余铁素体的方法，中国，ZL 201710090256.X。

[4] 陈浩；朱加宁；周晓胜；一种相间析出强化的低活化铁素体钢及其制备方法，中国，ZL 202010076615.8

（3）主要科研项目

国家自然科学基金青年基金，主持

山西省重点研发计划，主持

中国博士后科学基金面上项目一等资助，主持